LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> B2300 Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Engine Mechanical [Service Information 4.0L]) >> Valve Tappet Removal / Installation - 4.0L

Valve Tappet Removal / Installation - 4.0L

WARNING: This page is about a different car, the 2006 Mazda B4000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the valve covers. See VALVE COVER - RH REMOVAL / INSTALLATION - 4.0L  or VALVE COVER - LH REMOVAL / INSTALLATION - 4.0L  .
  2. Remove the fuel supply manifold. See FUEL INJECTION SUPPLY MANIFOLD AND FUEL INJECTOR - 4.0L REMOVAL / INSTALLATION .
    Fig 1: Removing Camshaft Roller Followers
    G04307569Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • Mark each camshaft roller follower to ensure its original position during reassembly.
  3. Using the valve spring compressor SST  , remove the camshaft roller followers.
    NOTE:
    • Lubricate the parts with clean engine oil prior to installing.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals