Engine Air Cleaner Removal / Installation - 4.0L

WARNING: This page is about a different car, the 2006 Mazda B4000. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Air Cleaner Outlet Tube With Torque Specifications

Courtesy of MAZDA MOTORS CORP.

Remove the tube from the mass air flow (MAF) sensor.

Fig 2: Removing Tube From Mass Air Flow (MAF) Sensor
Courtesy of MAZDA MOTORS CORP.
Disconnect the MAF sensor electrical connector.

Fig 3: Disconnecting MAF Sensor Electrical Connector
Courtesy of MAZDA MOTORS CORP.
NOTE:
- Pry the engine air cleaner from the base.
Remove the engine air cleaner assembly.
NOTE:
- Clean the engine air cleaner with a dry, clean cloth.
To install, reverse the removal procedure.