Air Cleaner Outlet Pipe Removal / Installation - 2.3L

Disconnect the negative battery cable. See BATTERY DISCONNECT .

Fig 1: Removing Accelerator Control Splash Shield
Courtesy of MAZDA MOTORS CORP.
Remove the accelerator control splash shield.

Fig 2: Disconnecting Mass Air Flow (MAF) Electrical Connector
Courtesy of MAZDA MOTORS CORP.
Disconnect the mass air flow (MAF) electrical connector.

Fig 3: Disconnecting Electrical Harness Push Pins
Courtesy of MAZDA MOTORS CORP.
Disconnect the electrical harness push pins and the crankcase ventilation tube.

Fig 4: Removing/Installing Clamps & Bolt With Torque Specifications
Courtesy of MAZDA MOTORS CORP.
Loosen the hose clamps, remove the bolt and remove the air cleaner outlet pipe.
To install, reverse the removal procedure.