LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> B2300 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrumentation/Driver Info >> Horn >> Removal and Installation

Removal and Installation

  1. Disconnect the electrical connector.
  2. Remove the bolt and the horn.
    • To install, tighten to 13 N-m (1.3 kgf-m, 10 ft-lbf).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals