LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Manual Transaxle [Service, Removal & Installation A65M-R)) >> Vehicle Speed Sensor Inspection (Without Abs)

Vehicle Speed Sensor Inspection (Without Abs)

WARNING: This page is about a different variant/trim than selected.
  1. Remove the vehicle speed sensor.
  2. Measure voltage (AC range) between terminals of the vehicle speed sensor while the gear is turning.
    METER NEEDLE ACTION CHART

    Meter needle Action
    Moves slightly under 5 V (AC range) Repair wiring harness between instrument cluster and vehicle speed sensor.
    Does not move Replace vehicle speed sensor.
  3. Install the vehicle speed sensor.
    Fig 1: Measuring Voltage (AC Range) Between VSS Terminals
    G04326158Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals