LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Exhaust System (L3)) >> Exhaust System Removal/Installation >> Exhaust Manifold Insulator (Upper) Installation Note >> California emission regulation applicable ATX model

California emission regulation applicable ATX model

WARNING: This page is about a different variant/trim than selected.
Fig 1: Exhaust Manifold Insulator Mounting Bolt Tightening Sequence (California Emissions)
G04324917Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals