Bracket Installation Note (California Emission Regulation Applicable ATX Model)
WARNING: This page is about a different variant/trim than selected.
- Install bracket A using bolts A and tighten to the Specified torque.
Tightening torque
38-51 N.m {3.9-5.2 kgf.m, 29-37 ft.lbf}
- Temporarily install bracket B using bolts B.
- Tighten bolts B to the Specified torque.
Tightening torque
38-51 N.m {3.9-5.2 kgf.m, 29-37 ft.lbf}