LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical [Service Information L3)) >> Timing Chain Removal/Installation >> Front Oil Seal Installation Note

Front Oil Seal Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Apply clean engine oil to the oil seal.
  2. Push the oil seal slightly in by hand.
  3. Compress the oil seal using the SST  and a hammer.
    Fig 1: Pushing Oil Seal Using SST
    G04324332Courtesy of MAZDA MOTORS CORP.
    Fig 2: Installing Oil Seal Using Hammer
    G04324333Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals