LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical [Service Information L3)) >> Front Oil Seal Replacement >> Front Oil Seal Installation Note

Front Oil Seal Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Apply clean engine oil to the oil seal lip.
  2. Push the oil seal slightly in by hand.
  3. Tap the oil seal in evenly using the SST  and a hammer.
    Fig 1: Pushing Oil Seal
    G04324353Courtesy of MAZDA MOTORS CORP.
    Fig 2: Taping Oil Seal Using SST And Hammer
    G04324354Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals