LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical [Service Information L3)) >> Engine Disassembly/Assembly

Engine Disassembly/Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the engine and automatic transaxle. (ATX) (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION ).
  2. Disconnect the engine and manual transaxle. (MTX) (See MANUAL TRANSAXLE REMOVAL/INSTALLATION ).
  3. Remove the intake-air system. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION ).
  4. Remove the exhaust system. (See EXHAUST SYSTEM REMOVAL/INSTALLATION ).
  5. Remove the generator. (See GENERATOR REMOVAL/INSTALLATION [L3, AJ] ).
  6. Remove the ignition coils. (See IGNITION COIL REMOVAL/INSTALLATION ).
  7. Remove the crankshaft position (CKP) sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION ).
  8. Assemble in the reverse order of disassembly.
scientia non olet · About LEMON Manuals