LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Mechanical [Service Information L3)) >> Cylinder Head Gasket Replacement >> Cylinder Head Removal Note

Cylinder Head Removal Note

WARNING: This page is about a different variant/trim than selected.
  1. Loosen the cylinder head bolts in two or three steps in the order shown in the figure.
    Fig 1: Loosening Cylinder Head Bolts
    G04324345Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals