Output gear And Inner Race Assembly Note

WARNING: This page is about a different variant/trim than selected.

Install the output gear to the secondary gear component using the SST .
Press-in force

20 kN {204 kgf, 450 lbf}

Fig 1: Installing Output Gear To Secondary Gear
Courtesy of MAZDA MOTORS CORP.
Install the inner race to the secondary gear component using the SST .
Press-in force

20 kN {204 kgf, 450 lbf}

Fig 2: Installing Inner Race To Secondary Gear

Courtesy of MAZDA MOTORS CORP.