LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Automatic Transaxle - Overhaul (FS5A-El)) >> Secondary Gear And Output Gear Disassembly/Assembly >> Lock nut Disassembly Note

Lock nut Disassembly Note

WARNING: This page is about a different variant/trim than selected.
  1. Rotate the manual shaft to the P position.
    Fig 1: Rotating Manual Shaft
    G05118762Courtesy of MAZDA MOTORS CORP.
  2. Knock the crimped portion of the locknut outward by using a small chisel and a hammer.
  3. Remove the lock nut.
    Fig 2: View Of Lock Nut
    G05118763Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals