LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Automatic Transaxle - Overhaul (FS5A-El)) >> Parking Mechanism Disassembly/Assembly >> Assembly Procedure

Assembly Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Install the manual plate to the detent bracket component.
  2. Install the parking assist lever component to the detent bracket component and the manual plate.
    Fig 1: View Of Manual Plate And Detent Bracket Component
    G05118758Courtesy of MAZDA MOTORS CORP.
  3. Install the E-ring.
    Fig 2: View Of E-Ring
    G05118759Courtesy of MAZDA MOTORS CORP.
  4. Install the parking rod component.
Fig 3: View Of Parking Rod Component
G05118760Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals