LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Automatic Transaxle - Overhaul (FS5A-El)) >> Low And Reverse Brake And One-Way Clutch Inner Race Disassembly/Assembly >> Snap Ring Disassembly Note

Snap Ring Disassembly Note

WARNING: This page is about a different variant/trim than selected.
  1. Install the SSTs  as shown.
    CAUTION:
    • Depress the one-way clutch inner race only enough to remove the snap ring. Overpressing will damage the one-way clutch inner race assembly edges.
  2. Compress the one-way clutch inner race.
  3. Remove the snap ring.
  4. Remove the SSTs  and remove one-way clutch inner race and the piston return spring.
    Fig 1: Identifying SSTS
    G05118723Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals