LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Automatic Transaxle - Overhaul (FS5A-El)) >> Forward Clutch Preinspection >> One-Way Clutch No.2 Component Preinspection

One-Way Clutch No.2 Component Preinspection

WARNING: This page is about a different variant/trim than selected.
  1. Set the one-way clutch No.2 component and direct clutch to the transaxle case. Verify that the one-way clutch rotates smoothly when turned counterclockwise and locks when turned clockwise.
  2. If not as specified, replace parts as necessary.
    Fig 1: Inspecting One-Way Clutch No.2
    G05118942Courtesy of MAZDA MOTORS CORP.