LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Automatic Transaxle - Overhaul (FS5A-El)) >> Forward Clutch Preinspection >> Front Internal Gear and One-Way Clutch No.1 Component Preinspection

Front Internal Gear and One-Way Clutch No.1 Component Preinspection

WARNING: This page is about a different variant/trim than selected.
  1. Set the front internal gear and one-way clutch No.1 component to the one-way clutch inner race. Verify that the one-way clutch rotates smoothly when turned counterclockwise and locks when turned clockwise.
  2. If not as specified, replace parts as necessary. (See FRONT INTERNAL GEAR ONE-WAY CLUTCH NO.1 COMPONENT DISASSEMBLY/ASSEMBLY .)
    Fig 1: Inspecting Front Internal Gear And One-Way Clutch No.1
    G05118937Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals