LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Automatic Transaxle - Overhaul (FS5A-El)) >> Forward Clutch Piston Disassembly Note >> Notes

Forward Clutch Piston Disassembly Note: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Set the forward clutch drum and turbine shaft onto the oil pump.
  2. Remove the forward clutch piston by applying compressed air through the fluid passage.

    Air pressure 

    392 kPa {4.0 kgf/cm 2  , 57 psi} max. 

    Fig 1: Applying Compressed Air Through Fluid Passage
    G05118679Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals