LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Automatic Transaxle - Overhaul (FS5A-El)) >> Direct Clutch Disassembly/Assembly >> Needle Bearing Disassembly Note

Needle Bearing Disassembly Note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the needle bearing using the SST  as shown in the figure.
    Fig 1: Removing Needle Bearing Using SST
    G05118734Courtesy of MAZDA MOTORS CORP.