LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (Automatic Transaxle - Overhaul (FS5A-El)) >> Clutch Component Disassembly/Assembly >> 3-4 Clutch Piston Disassembly Note

3-4 Clutch Piston Disassembly Note

WARNING: This page is about a different variant/trim than selected.
  1. Set the 3-4 clutch drum onto the end cover.
  2. Remove the 3-4 clutch piston from the 3-4 clutch drum by applying compressed air through the fluid passage.

    Air pressure 

    392 kPa {4.0 kgf/cm 2  , 57 psi} max. 

Fig 1: Applying Compressed Air Through Fluid Passage
G05118692Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals