LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Control System (L3)) >> Crankshaft Position (CKP) Sensor Removal/Installation >> Removal

Crankshaft Position (CKP) Sensor Removal/Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Perform the following procedure to making the working space.
    1. Remove the Front wheel (RH).
    2. Remove the splash shield.
  2. Disconnect the CKP sensor connector.
  3. Remove the installation bolts to remove the CKP sensor.
scientia non olet · About LEMON Manuals