LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (All Wheel Drive (AWD)) >> Coupling Component Disassembly >> Output Shaft Disassembly Note

Output Shaft Disassembly Note

WARNING: This page is about a different variant/trim than selected.
  1. Remove the coupling unit from the SST.
  2. Install the coupling unit to the press as shown, and remove the output shaft together with the coupling unit.
  3. Install the companion flange to the output shaft.
    Fig 1: Installing Coupling Unit
    G04325770Courtesy of MAZDA MOTORS CORP.
  4. Secure the companion flange using the SST  , and remove the bolts.
  5. Remove the output shaft.
    Fig 2: Securing Companion Flange Using SST
    G04325771Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals