LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (All Wheel Drive (AWD)) >> Coupling Component Assembly >> Locknut Assembly Note

Locknut Assembly Note

WARNING: This page is about a different variant/trim than selected.
  1. Secure the companion flange using the SST  , and tighten a new locknut.

    Tightening torque 

    167-226 N.m {17.1-23.0 kgf.m, 124-166 ft.lbf} 

    Fig 1: Securing Companion Flange Using SST And Tightening Locknut
    G04325779Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals