LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Starting System (L3 With TC)) >> Starter Interlock Switch Inspection >> Continuity Inspection

Continuity Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the starter interlock switch connector.
  2. Verify that the continuity is as indicated in the table.
    • If there is any malfunction, replace the starter interlock switch.
      Fig 1: Checking Starter Interlock Switch Continuity
      G04325105Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying Starter Interlock Switch Connector Terminals
      G04325106Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals