LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Starting System (L3 With TC)) >> Starter Inspection >> On-vehicle Inspection

On-vehicle Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Verify that the battery is fully charged.
  2. The starter is normal if it rotates smoothly and without any noise when the engine is cranked.
    • If the starter does not operate, inspect the following:
      • Remove the starter, and inspect the starter unit.
      • Inspect the related wiring harnesses and the ignition switch.