LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Automatic Transaxle [Service, Removal & Installation FS5A-El)) >> Solenoid Valve Inspection (Secondary Control Valve Body) >> Resistance Inspection (Off-Vehicle Inspection) >> Notes

Resistance Inspection (Off-Vehicle Inspection): Notes

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the negative battery cable.
  2. Remove the battery and battery tray.
  3. Remove the solenoid valve(s). (See SOLENOID VALVE REMOVAL/INSTALLATION (SECONDARY CONTROL VALVE BODY) ).
  4. Measure the resistance of each solenoid valve individually.
    • If not as specified, replace the solenoid valve.
  5. Install the solenoid valve(s). (See SOLENOID VALVE REMOVAL/INSTALLATION (SECONDARY CONTROL VALVE BODY) ).
  6. Install the battery and battery tray.
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals