LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Automatic Transaxle [Service, Removal & Installation FS5A-El)) >> Oil Cooler Removal/Installation >> Radiator (In Tank Oil Cooler) Installation Note

Radiator (In Tank Oil Cooler) Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. The automatic transaxle oil cooler flushing must be performed whenever a transaxle is removed for service because the existing fluid may be contaminated, and to prevent contamination of new fluid.
    NOTE:
    • Flushing must be performed after installation of the overhauled or replaced transaxle.
  2. Follow the instructions in the manufacturer's publication for flushing operation.
scientia non olet · About LEMON Manuals