LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Automatic Transaxle [Service, Removal & Installation FS5A-El)) >> Oil Cooler Flushing >> Power Flushing >> Inspecting oil lines and clamps

Inspecting oil lines and clamps

WARNING: This page is about a different variant/trim than selected.
  1. Be sure to inspect the lines (hoses/pipes) for cuts, crimps (pinched), cracks or any other damage before reusing them.
    • If any problems exist, replace lines and clamps.
      CAUTION:
      • Always use new clamps when replacing hoses.
scientia non olet · About LEMON Manuals