LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Automatic Transaxle [Service, Removal & Installation FS5A-El)) >> Oil Cooler Flushing >> Back flushing

Back flushing

WARNING: This page is about a different variant/trim than selected.
  1. Using the power flushing equipment manufacturer's instructions, connect equipment so the flushing fluid flows in the opposite direction of normal fluid flow.
  2. Flush oil cooler/lines until discharge fluid is clean.
    CAUTION:
    • If the cooler can not be properly flushed using recommended equipment, send the radiator out for sublet cleaning or replace.
      Fig 1: Back Flushing Oil Cooler/Lines
      G04326320Courtesy of MAZDA MOTORS CORP.