LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Automatic Transaxle [Service, Removal & Installation FS5A-El)) >> Intermediate Sensor Inspection >> Visual Inspection

Visual Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Remove the intermediate sensor. (See INTERMEDIATE SENSOR REMOVAL/INSTALLATION ).
  2. Make sure that the sensor is free of any metallic shavings or particles.
    • If any are found on the sensor, clean them off.
  3. Install the intermediate sensor. (See INTERMEDIATE SENSOR REMOVAL/INSTALLATION ).
scientia non olet · About LEMON Manuals