LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Automatic Transaxle [Service, Removal & Installation FS5A-El)) >> Intermediate Sensor Inspection >> Notes

Intermediate Sensor Inspection: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Connect the WDS or equivalent, drive the vehicle, and verify the input value of the ISS PID.
    • If the input value is 0 RPM, perform the "Power Supply Voltage Inspection", "Open Circuit Inspection", or "Short Circuit Inspection".
    • If the input value is other than 0 RPM, perform the "Visual Inspection" or "Wave Profile Inspection".