LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Manual Transaxle Clutch) >> Clutch Unit Removal/Installation [A26MX-R] >> Pilot Bearing Removal Note

Pilot Bearing Removal Note

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • The pilot bearing does not need to be removed unless you are replacing it.
  1. Use the SST  to remove the pilot bearing.
    Fig 1: Removing Pilot Bearing
    G04326107Courtesy of MAZDA MOTORS CORP.