LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Manual Transaxle Clutch) >> Clutch Master Cylinder Disassembly/Assembly [G35M-R, A65M-R] >> Snap Ring Disassembly/Assembly Note

Snap Ring Disassembly/Assembly Note

WARNING: This page is about a different variant/trim than selected.
  1. Hold the piston down using a cloth-wrapped pin punch.
    • If disassembling, remove the snap ring; if assembling, install it.
      Fig 1: Holding Piston Down Using Cloth-Wrapped Pin Punch
      G04326082Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals