LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Charging System (L3 With TC)) >> Generator Inspection [L3 With TC] >> Generator Inner Parts >> Stator coil

Stator coil

WARNING: This page is about a different variant/trim than selected.
  1. Verify that the continuity is as indicated in the table.
    Fig 1: Terminal Resistance Reference
    G04325041Courtesy of MAZDA MOTORS CORP.
    • If there is any malfunction, replace the stator.
      Fig 2: Verifying Stator Coil
      G04325042Courtesy of MAZDA MOTORS CORP.
  2. Verify that there is no continuity between the stator coil leads and core using a tester.
    • If there is continuity, replace the stator coil.
      Fig 3: Inspecting Continuity Between Stator Coil Leads And Core
      G04562932Courtesy of MAZDA MOTORS CORP.