Diagnostic procedure
WARNING: This page is about a different variant/trim than selected.
DIAGNOSTIC PROCEDURE
| STEP |
INSPECTION |
ACTION |
| 1 |
Inspect the following components for loose attaching bolts or worn parts:
- Cooling fan
- Condenser fan
- Drive belt and pulleys
- Engine mounts
All items normal? |
Yes |
Inspect the following systems:
- Wheels
- ATX
- Driveline
- Suspension
|
| No |
Readjust or retighten engine mount installation position.
Service if necessary for other parts. |
| 2 |
Verify test results.
- If okay, return to diagnostic index to service any additional symptoms.
- If malfunction remains, inspect related Service Bulletins and/or On-line Repair Information and perform repair or diagnosis.
- If vehicle is repaired, troubleshooting completed.
- If vehicle is not repaired or additional diagnostic information is not available, reprogram PCM if later calibration is available. Retest.
|