LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Emission System (L3 With TC)) >> Evaporative Emission (EVAP) Control System Removal/Installation >> Purge Solenoid Valve Installation Note

Purge Solenoid Valve Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Install the purge solenoid valve.
    Fig 1: Purge Solenoid Valve
    G04324991Courtesy of MAZDA MOTORS CORP.
  2. Fit the vacuum hose (purge solenoid valve) onto the respective fittings, and install clamps as shown.
    Fig 2: Installing Clamps
    G04324992Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals