Resistance Inspection
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Perform the following test only when directed.
- Disconnect the negative battery cable.
- Inspect resistance of the EGR valve coils.
- If not as specified, replace the EGR valve.
- If as specified, carry out the "Circuit Open/Short Inspection".
TERMINAL RESISTANCE REFERENCE
| Terminals |
Resistance (ohm) |
C-E
C-A
D-B
D-F |
8-9 |
Courtesy of MAZDA MOTORS CORP.
Courtesy of MAZDA MOTORS CORP.