LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Mechanical [Intake-Air System L3 With TC)) >> Intake Air System Removal/Installation >> Wastegate Control Solenoid Valve Installation Note

Wastegate Control Solenoid Valve Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Install the wastegate control solenoid valve.

    Tightening torque 

    7.8-10.8 N.m {80-110 kgf.cm, 70-95 in.lbf} 

  2. Install the hose as shown in the figure.
scientia non olet · About LEMON Manuals