LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Mechanical [Lubrication System L3 With TC)) >> Engine Oil Level Inspection

Engine Oil Level Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Position the vehicle on level ground.
  2. Warm up the engine to normal operating temperature.
  3. Stop the engine and wait for 5 min  .
  4. Remove the dipstick and verify that the oil level is between the MIN and MAX marks on the dipstick and inspect the engine oil condition.
    • If the oil level is below the MIN mark, add the recommended engine oil.
    • If necessary, replace with the recommended engine oil.
      Fig 1: Identifying Mark On Dipstick
      G04324642Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals