LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Control System (L3 With TC)) >> Crankshaft Position (CKP) Sensor Removal/Installation >> Removal

Crankshaft Position (CKP) Sensor Removal/Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Perform the following procedure to allow for enough working space.
    1. Remove the Front wheel (RH).
    2. Remove the splash shield.
  2. Disconnect the CKP sensor connector.
  3. Remove the installation bolts to remove the CKP sensor.
scientia non olet · About LEMON Manuals