LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical [Service Information L3 With TC)) >> Rear Oil Seal Replacement >> Notes

Rear Oil Seal Replacement: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Remove the flywheel. (See CLUTCH UNIT REMOVAL/INSTALLATION [A26MX-R] ).
  2. Remove in the order indicated in the figure.
  3. Install in the reverse order of removal.
    Fig 1: Installing Rear Oil Seal & Torque Specification
    G04324452Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals