Procedures For Determining The Location Of A Malfunction [L3 With TC]: Pcm
WARNING: This page is about a different variant/trim than selected.
- Check the display of DTC U0121 and/or U0155, using the SST (WDS or equivalent). (See DTC TABLE [MULTIPLEX COMMUNICATION SYSTEM (L3 WITH TC)] ).
- Referring to the following table, determine the malfunctioning part of the CAN system.
PCM MALFUNCTION REFERENCE
| -: Communication error | |||
|---|---|---|---|
| Module | Communication status | Malfunction location | |
| DSC HU/CM | Instrument cluster | ||
| PCM | - | - |
|
| - | X |
|
|
| X | - |
|
|