Instrument Cluster
WARNING: This page is about a different variant/trim than selected.
- Check the display of DTC U1900 using the SST (WDS or equivalent). (See DTC TABLE [MULTIPLEX COMMUNICATION SYSTEM (L3 WITH TC)] ).
- Access and monitor the "ABS_MSG", "AWD_MSG", "PCM_MSG", "RKE_MSG" and "TPM_MSG" of PID using the SST (WDS or equivalent).
- Referring to the PID/DATA MONITOR, confirm the display status of the PID. (See PID/DATA MONITOR TABLE [MULTIPLEX COMMUNICATION SYSTEM (L3 WITH TC)] ).
- Referring to the following table, determine the malfunctioning part of the CAN system.
INSTRUMENT CLUSTER MALFUNCTIONING REFERENCE
| X: Normal | |||||
|---|---|---|---|---|---|
| -: Communication error | |||||
| Module | Communication status | Malfunction location | |||
| PCM | DSC HU/CM | AWD control module | Keyless control module | ||
| Instrument cluster | - | - | - | - |
|
| - | X | X | X |
|
|
| X | - | X | X |
|
|
| X | X | - | X |
|
|
| X | X | X | - |
|
|
| - | - | - | X |
|
|