DSC HU/Cm
WARNING: This page is about a different variant/trim than selected.
- Check the display of DTC U0100, U0114, U0155 and/or U2511, using the SST (WDS or equivalent). (See DTC TABLE [MULTIPLEX COMMUNICATION SYSTEM (L3 WITH TC)] ).
- Access and monitor the "PCM_MSG" and "AWD_MSG" of PID using the SST (WDS or equivalent).
- Referring to the PID/DATA MONITOR, confirm the display status of the PID. (See PID/DATA MONITOR TABLE [MULTIPLEX COMMUNICATION SYSTEM (L3 WITH TC)] ).
- Referring to the following table, determine the malfunctioning part of the CAN system.
DSC HU/CM MALFUNCTION REFERENCE
| X: Normal | ||||
|---|---|---|---|---|
| -: Communication error | ||||
| Module | Communication status | Malfunction location | ||
| PCM | AWD control module | Instrument cluster | ||
| DSC HU/CM | - | - | - |
|
| - | X | X |
|
|
| X | - | X |
|
|
| X | X | - |
|
|