LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (On-Board Diagnostic [Multiplex Communication System - L3 With TC)) >> Procedures For Determining The Location Of A Malfunction [L3 With TC] >> AWD Control Module

AWD Control Module

WARNING: This page is about a different variant/trim than selected.
  1. Check the display of DTC U0100 and/or U0121 using the SST  (WDS or equivalent). (See DTC TABLE [MULTIPLEX COMMUNICATION SYSTEM (L3 WITH TC)] ).
  2. Referring to the following table, determine the malfunctioning part of the CAN system.
AWD CONTROL MODULE MALFUNCTION REFERENCE

X: Normal
-: Communication error
Module Communication status Malfunction location
PCM DSC HU/CM
AWD control module - -
  • Wiring harness D
  • AWD Control Module
- X
  • Wiring harness A
  • PCM
X -
  • Wiring harness C
  • DSC HU/CM