LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (On-Board Diagnostic [Engine Control System L3)) >> DTC B1342 >> Diagnostic procedure

Diagnostic procedure

WARNING: This page is about a different variant/trim than selected.
DTC B1342 DIAGNOSTIC PROCEDURE

STEP INSPECTION ACTION
1 VERIFY CURRENT STATUS OF MALFUNCTION 
  • Clear the DTC from the PCM memory using the WDS or equivalent.
  • Is same DTC present?
Yes Replace the PCM, then go to the next step.
(See PCM REMOVAL/INSTALLATION ).
No Go to the next step.
2 VERIFY AFTER REPAIR PROCEDURE 
Yes Go to the applicable DTC inspection.
(See DTC TABLE ).
No Troubleshooting completed.