LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Mechanical [Lubrication System L3, AJ) >> Engine Oil Level Inspection

Engine Oil Level Inspection

  1. Position the vehicle on level ground.
  2. Warm up the engine to normal operating temperature.
  3. Stop the engine and wait for 5 min  .
  4. Remove the dipstick and verify that the oil level is between the F and L marks on the dipstick and inspect the engine oil condition.
    • If the oil level is below the L mark, add the recommended engine oil.
    • If necessary, replace with the recommended engine oil.
      Fig 1: Identifying Mark On Dipstick
      G04324609Courtesy of MAZDA MOTORS CORP.