LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 6 s, 4D Wagon, Automatic >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Fuel Gauge Sender Unit Removal/Installation [AWD] >> Fuel leak inspection after fuel gauge sender sub-unit installation

Fuel leak inspection after fuel gauge sender sub-unit installation

  1. Drive the vehicle.
  2. Perform a quick start and a hard brake 5-6 times. 
  3. Stop the vehicle.
  4. Verify that there is no fuel leakage near the fuel pump unit in the vehicle interior.
scientia non olet · About LEMON Manuals