LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 5 L4-2.3L >> Repair and Diagnosis >> Instrument Panel, Gauges and Warning Indicators >> Instrument Cluster / Carrier >> Testing and Inspection >> Reading and Clearing Diagnostic Trouble Codes >> With Manufacturer's Scan Tool

With Manufacturer's Scan Tool

DTC INSPECTION [INSTRUMENT CLUSTER]

WDS




1. Connect the WDS or equivalent to the DLC-2.
2. Verify if any DTCs are displayed.
If any DTCs are displayed, perform the troubleshooting according to the corresponding DTC inspection.
3. Disconnect the WDS or equivalent.
scientia non olet · About LEMON Manuals