LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> Tribute 4WD L4-2.3L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Tune-up and Engine Performance Checks >> Air Cleaner Housing >> Air Cleaner Fresh Air Duct/Hose >> Service and Repair >> Air Cleaner Outlet Pipe

Air Cleaner Outlet Pipe

AIR CLEANER OUTLET PIPE

Removal and Installation
1. Disconnect the air cleaner outlet pipe at the mass air flow/intake air temperature sensor.
- Loosen the screw clamp and disconnect the pipe.

2. Remove the outlet pipe.
- Disconnect the outlet pipe from the throttle body.
- Unclip the hose from the outlet pipe.
- Disconnect the crankcase vent tube and remove the air cleaner outlet pipe.

NOTE: The air cleaner outlet pipe should be securely sealed to prevent unmetered air from entering the engine.

3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals